Haynes® Alloy 214

---

Applications

Honeycomb seals, flame hoods, burners, mesh belts, catalytic converters, Chlorine contaminated incinerator systems, and other static oxidation – limited parts

Description

Haynes^® Alloy 214 is a nickel-chromium-aluminum-iron alloy with excellent high temperature corrosion and oxidation resistance at and above 955°C (1750°F). H214 is best suited for high temperature, low stress environments. Haynes^® Alloy 214 is sold in the solution heat treated condition. At temperatures above 1750°F, an Al₂O₃ type oxide scale develops, providing excellent resistance to carburization, nitriding and corrosion in chlorine-bearing oxidizing environments.

Industries Supplied

Aerospace, Automotive, Industrial Heating, Medical Waste Disposal, and Land-Based Gas Turbines.

Nominal Composition

C: 0.15 max
Mn: 1.00 max
Si: 0.50 max
S: 0.015 max
Cr: 15.0 – 17.0
Co: 2.0 max 
Mo: 1.0 max 
W: 1.0 max 
Ti: 0.50 max
Al: 4.0 – 5.0
B: 0.015 max 
Fe: 2.0 – 6.0 
Y: 0.002 – 0.004
Ni: Remainder

Physical Properties

Density: 0.293 lb/in³, (8.1 g/cm³)

Modulus of Elasticity (E): 
At 70°F (20°C): 31.5 x 103 ksi (218 GPa)

Modulus of Rigidity (G): 
At 70°F (20°C): 12 x 103 ksi (84 GPa)

Coefficient of Expansion:
7.4 µin/in.-°F (70°F to 1000°F)
13 µm/m-°C (20°C to 538°C)

Electrical Resistivity: 55 µΩ.in, (140.0 µΩ.cm)

Thermal Conductivity: 83 Btu-in/ft²hr-°F, (12 W/m-K)

Applicable Specifications

Strip and Foil: B50A913, B50TF219, PS-6073, MTS 1379-1, MSRR7238, PWA 1130, DMD 0495

Typical Mechanical Properties

• Annealed
  • Heat Treatment: Per specifications
  • Tensile Strength: 115 – 160 ksi (790 – 1100 MPa)
  • Suggested Operating Conditions: -330°F to 2400°F (-200°C to 1315°C)

---

Haynes^® is a registered trademark of Haynes International, Inc. 

For further information Contact:

Email: stripinfo@elgiloy.com
Phone: 1 888 843 2350 
Elgiloy Specialty Metals – Strip Products
1565 Fleetwood Dr.
Elgin, IL 60123 USA